Acc. / Replacements / Fixes
€1.75
Item:
Please choose
In stock
1
Acc. / Replacements / Fixes
Product Details
Spectravideo SV / SVI•318 / 328 / 728 MSX - Replacement Rubber Foot / Feet - NEW
Diameter: 16 mm (Actual size approx. 15,8 mm)
Diameter: 0.63'' (Actual size approx. 0.622'')
Self adhesive.
---------------------------------
Spectravideo SV / SVI•767 (not 767TP) / 903 / 904 - Replacement Rubber Foot / Feet - NEW
Diameter: 15 mm
Diameter: 0.59''
* I believe these may also fit the SVI-707 / 777 / 902 drives (feedback on this is welcome).
Self adhesive.
---------------------------------
Pause Fix: AMSTRAD / Schneider CPC 464 Cassette Tape Player & Atari(*), ZX +2(*) - No Drillbit - NEW
AMSTRAD / Schneider CPC 464 Cassette Tape Player Pause Latch Pin & Latch Spring (Not Latch Itself)
Made for and tested on the AMSTRAD / Schneider CPC 464 built-in tape drive. *Should fit some Atari 1010 and ZX Spectrum 128 +2 (Grey) / +2A/B (Black) internal drives, and probably other drives with shared mechanisms – look at the last 3 pictures; some have differently shaped latches, but same type pin and spring.
(Drives are for illustration – not included.)
(Drives are for illustration – not included.)
The pin is a tight fit. Insert the pin into the mounting shaft as far as it goes (use a little pressure, carefully pushing it in).
If needed, choose the other option, which includes a 0.9mm drill bit to clear out remnants/residue in mounting shaft (do not use a drill, but finger action only).
White is standard, but other colours are available (write me, if needed).
---------------------------------
Pause Fix: AMSTRAD / Schneider CPC 464 Cassette Tape Player & Atari(*), ZX +2(*) - With Drillbit - NEW
AMSTRAD / Schneider CPC 464 Cassette Tape Player Pause Latch Pin & Latch Spring (Not Latch Itself)
Made for and tested on the AMSTRAD / Schneider CPC 464 built-in tape drive. *Should fit some Atari 1010 and ZX Spectrum 128 +2 (Grey) / +2A/B (Black) internal drives, and probably other drives with shared mechanisms – look at the last 3 pictures; some have differently shaped latches, but same type pin and spring.
(Drives are for illustration – not included.)
(Drives are for illustration – not included.)
The pin is a tight fit. Insert the pin into the mounting shaft as far as it goes (use a little pressure, carefully pushing it in).
If needed, use included 0.9mm drill bit to clear out remnants/residue in mounting shaft (do not use a drill, but finger action only). If you don't need the drill bit, choose the other option.
White is standard, but other colours are available (write me, if needed).
---------------------------------
Display prices in:EUR
